Tech Chem's X-Ray Products

X-Ray Products

Toll-Free Ordering 800-852-5641 ~ Toll-Free Fax 888-424-3294 We now accept Visa, MasterCard, and Discover!

Live Mon-Fri 8 am - 5:30 pm CST OR Leave a message OR Email us to send an order or provide your contact info!

X-Ray Products

Select from our complete line of Automatic or Manual X-Ray Developers and Fixers, Cleaners & Miscellaneous items! For immediate ordering, print the Dental Order Form and fax, call, or mail it to us!

Were You Told. . .

FIXER outlasts developer 2-6 times. By retaining your fixer between cleanings and only disposing of it when it is saturated with silver, you could be saving HUNDREDS OF DOLLARS. You CAN and should buy fixer when YOU need it – WITHOUT paying extra. Before disposing of your fixer test it with Tech Chem’s Fixer Check for X-Ray Use™!

DEVELOPER – Air and heat are the two main contaminates of developer.

AIR – When replenishing the developer, before you replace the cap, squeeze the bottle to remove as much air as possible – replace the cap and store in a cool, dark place. By eliminating the air in the bottle, the developer will NOT oxidize (turn dark) as quickly. Keep machine covered. Do NOT let the solutions “air out” – you will only cause the developer to oxidize quicker.

HEAT – If you are going through developer quicker than usual, using a thermometer, place it in the developer. The temperature of the developer should be the same as the thermostat setting, if not, call a serviceman, or simply adjust the thermostat.

Mark you transports, trays and covers and always keep the developer parts together and the fixer parts together. This eliminates two common problems: (1) cross contamination and (2) swelling of the roller covers. (When a transport assembly is exposed to the opposite solution i.e. the fixer transport is put in the developer or vice versa, there is a chemical reaction that can cause the roller covers to swell and the film to stick.)
Do NOT allow the transports to air dry. They are designed to be in solution. If it is necessary to leave them out of the processor, immerse them in a bucket (or deep sink) of clear water.
Do NOT towel dry the transports after cleaning. One piece of lint can cause damage to the transports and create false images on the films. After cleaning and rinsing thoroughly – shake the excess water from the transports, replace them in their respective tanks (sections) and fill with solutions.
Remember who you must buy the replacement transports from. By using common sense, you can actually extend the life of your transports and processor. Be a SMART consumer.
When draining the solutions – flush the drain with COLD water after each section is drained to help prevent a chemical reaction that can occur when used developer and fixer are mixed together.
Be sure to check the solution levels in automatic processors – an inadequate amount of solution can cause the processor to not function properly and the films to jam. If the level is too low, simply replenish.

Tech Chem, Inc.™ has seen a growing need in the x-ray market for the availability to purchase developer separately, yet economically. In continuing our strides for excellence, we offer all of our developers and fixer packaged to suit your needs – at the same price! Mix and match as you wish, in full cases please.

Why Choose Us?
Purchase Developer and Fixer to SUIT YOUR NEEDS! Order in complete cases please.
You will find our developers and fixer to be high quality and LONG LASTING!! A less expensive product may cost more in the long run!
Our Cleaners are environmentally and personnel SAFE!
By buying manufacturer direct, you are guaranteed FRESH PRODUCTS!
We have reduced our prices and you pay only the ACTUAL shipping charges! No additional handling fees!! No minimum order!
98% of our orders ship the SAME DAY!

We charge actual shipping on all orders. These charges will be added to your invoice total. There is an $11.00 fee for incorrect addresses. UPS charges this for address corrections and this will be passed on to you.

Why Choose Us?

To place an order or to ask a question call Toll Free 1-800-852-5641 within the United States.

FAX 1-888-424-3294 • Email Information

International orders call 1-417-424-3292.

Copyright © 2005-2008 Tech Chem, Inc.

www.techcheminc.com